HANGZHOU CANDID I/E CO., LTD
HANGZHOU CANDID I/E CO., LTD
Contact Us

What Are the Wearing Parts of the Staple Making Equipment, and How Long Do They Need to Be Replaced?

1. What are the vulnerable parts of staple making machine?


The complete set of staple equipment includes water tank type wire drawing flat wire machine, splicing machine, forming machine and packaging machine. In the complete set of equipment, the most important machines are forming machine and water tank type wire drawing flat wire machine, forming machine and The wearing parts of the water tank type drawing flat wire machine include nailing die and drawing die. The nailing die is the wearing part of the forming machine, and the drawing die is the wearing part of the water tank type drawing flat wire machine. Because these wearing parts directly affect the raw materials, we should pay attention to maintenance and replacement during use.


2. Repair and replacement of staple making machine


Regardless of whether it is to repair the mechanical structure or the electrical structure of the forming machine, the power supply of the staple making machine should be disconnected first. If the molding machine needs to be replaced, the original specifications should be used. Regularly clean the oil stains on the staple making machine to keep the molding machine clean. The nail mold needs to be cleaned frequently. Do not use rusty wire into the molding machine. Check the nail patterns frequently.


The mechanical structure of the complete set of staple equipment should be checked for lubricating grease every six months, and the other lubrication parts should be lubricated no less than three times per shift. The first fifteen days of the use of the new forming machine belong to the running-in period and require a lot of lubrication.

Related Products
Looking for the best solution of 
stationery manufacturing?
Looking for the best solution of stationery manufacturing?